1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2/*
3 * This file holds Hub protocol constants and data structures that are
4 * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
5 *
6 * It is used/shared between the USB core, the HCDs and couple of other USB
7 * drivers.
8 */
9
10#ifndef __LINUX_CH11_H
11#define __LINUX_CH11_H
12
13#include <linux/types.h> /* __u8 etc */
14
15/* This is arbitrary.
16 * From USB 2.0 spec Table 11-13, offset 7, a hub can
17 * have up to 255 ports. The most yet reported is 10.
18 * Upcoming hardware might raise that limit.
19 * Because the arrays need to add a bit for hub status data, we
20 * use 31, so plus one evens out to four bytes.
21 */
22#define USB_MAXCHILDREN 31
23
24/* See USB 3.1 spec Table 10-5 */
25#define USB_SS_MAXPORTS 15
26
27/*
28 * Hub request types
29 */
30
31#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
32#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
33
34/*
35 * Port status type for GetPortStatus requests added in USB 3.1
36 * See USB 3.1 spec Table 10-12
37 */
38#define HUB_PORT_STATUS 0
39#define HUB_PORT_PD_STATUS 1
40#define HUB_EXT_PORT_STATUS 2
41
42/*
43 * Hub class requests
44 * See USB 2.0 spec Table 11-16
45 */
46#define HUB_CLEAR_TT_BUFFER 8
47#define HUB_RESET_TT 9
48#define HUB_GET_TT_STATE 10
49#define HUB_STOP_TT 11
50
51/*
52 * Hub class additional requests defined by USB 3.0 spec
53 * See USB 3.0 spec Table 10-6
54 */
55#define HUB_SET_DEPTH 12
56#define HUB_GET_PORT_ERR_COUNT 13
57
58/*
59 * Hub Class feature numbers
60 * See USB 2.0 spec Table 11-17
61 */
62#define C_HUB_LOCAL_POWER 0
63#define C_HUB_OVER_CURRENT 1
64
65/*
66 * Port feature numbers
67 * See USB 2.0 spec Table 11-17
68 */
69#define USB_PORT_FEAT_CONNECTION 0
70#define USB_PORT_FEAT_ENABLE 1
71#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */
72#define USB_PORT_FEAT_OVER_CURRENT 3
73#define USB_PORT_FEAT_RESET 4
74#define USB_PORT_FEAT_L1 5 /* L1 suspend */
75#define USB_PORT_FEAT_POWER 8
76#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */
77#define USB_PORT_FEAT_C_CONNECTION 16
78#define USB_PORT_FEAT_C_ENABLE 17
79#define USB_PORT_FEAT_C_SUSPEND 18
80#define USB_PORT_FEAT_C_OVER_CURRENT 19
81#define USB_PORT_FEAT_C_RESET 20
82#define USB_PORT_FEAT_TEST 21
83#define USB_PORT_FEAT_INDICATOR 22
84#define USB_PORT_FEAT_C_PORT_L1 23
85
86/*
87 * Port feature selectors added by USB 3.0 spec.
88 * See USB 3.0 spec Table 10-7
89 */
90#define USB_PORT_FEAT_LINK_STATE 5
91#define USB_PORT_FEAT_U1_TIMEOUT 23
92#define USB_PORT_FEAT_U2_TIMEOUT 24
93#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
94#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
95#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
96#define USB_PORT_FEAT_BH_PORT_RESET 28
97#define USB_PORT_FEAT_C_BH_PORT_RESET 29
98#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
99
100#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8)
101
102/* USB 3.0 hub remote wake mask bits, see table 10-14 */
103#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
104#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
105#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)
106
107/*
108 * Hub Status and Hub Change results
109 * See USB 2.0 spec Table 11-19 and Table 11-20
110 * USB 3.1 extends the port status request and may return 4 additional bytes.
111 * See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15
112 */
113struct usb_port_status {
114 __le16 wPortStatus;
115 __le16 wPortChange;
116 __le32 dwExtPortStatus;
117} __attribute__ ((packed));
118
119/*
120 * wPortStatus bit field
121 * See USB 2.0 spec Table 11-21
122 */
123#define USB_PORT_STAT_CONNECTION 0x0001
124#define USB_PORT_STAT_ENABLE 0x0002
125#define USB_PORT_STAT_SUSPEND 0x0004
126#define USB_PORT_STAT_OVERCURRENT 0x0008
127#define USB_PORT_STAT_RESET 0x0010
128#define USB_PORT_STAT_L1 0x0020
129/* bits 6 to 7 are reserved */
130#define USB_PORT_STAT_POWER 0x0100
131#define USB_PORT_STAT_LOW_SPEED 0x0200
132#define USB_PORT_STAT_HIGH_SPEED 0x0400
133#define USB_PORT_STAT_TEST 0x0800
134#define USB_PORT_STAT_INDICATOR 0x1000
135/* bits 13 to 15 are reserved */
136
137/*
138 * Additions to wPortStatus bit field from USB 3.0
139 * See USB 3.0 spec Table 10-10
140 */
141#define USB_PORT_STAT_LINK_STATE 0x01e0
142#define USB_SS_PORT_STAT_POWER 0x0200
143#define USB_SS_PORT_STAT_SPEED 0x1c00
144#define USB_PORT_STAT_SPEED_5GBPS 0x0000
145/* Valid only if port is enabled */
146/* Bits that are the same from USB 2.0 */
147#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
148 USB_PORT_STAT_ENABLE | \
149 USB_PORT_STAT_OVERCURRENT | \
150 USB_PORT_STAT_RESET)
151
152/*
153 * Definitions for PORT_LINK_STATE values
154 * (bits 5-8) in wPortStatus
155 */
156#define USB_SS_PORT_LS_U0 0x0000
157#define USB_SS_PORT_LS_U1 0x0020
158#define USB_SS_PORT_LS_U2 0x0040
159#define USB_SS_PORT_LS_U3 0x0060
160#define USB_SS_PORT_LS_SS_DISABLED 0x0080
161#define USB_SS_PORT_LS_RX_DETECT 0x00a0
162#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
163#define USB_SS_PORT_LS_POLLING 0x00e0
164#define USB_SS_PORT_LS_RECOVERY 0x0100
165#define USB_SS_PORT_LS_HOT_RESET 0x0120
166#define USB_SS_PORT_LS_COMP_MOD 0x0140
167#define USB_SS_PORT_LS_LOOPBACK 0x0160
168
169/*
170 * wPortChange bit field
171 * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
172 * Bits 0 to 5 shown, bits 6 to 15 are reserved
173 */
174#define USB_PORT_STAT_C_CONNECTION 0x0001
175#define USB_PORT_STAT_C_ENABLE 0x0002
176#define USB_PORT_STAT_C_SUSPEND 0x0004
177#define USB_PORT_STAT_C_OVERCURRENT 0x0008
178#define USB_PORT_STAT_C_RESET 0x0010
179#define USB_PORT_STAT_C_L1 0x0020
180/*
181 * USB 3.0 wPortChange bit fields
182 * See USB 3.0 spec Table 10-11
183 */
184#define USB_PORT_STAT_C_BH_RESET 0x0020
185#define USB_PORT_STAT_C_LINK_STATE 0x0040
186#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
187
188/*
189 * USB 3.1 dwExtPortStatus field masks
190 * See USB 3.1 spec 10.16.2.6.3 Table 10-15
191 */
192
193#define USB_EXT_PORT_STAT_RX_SPEED_ID 0x0000000f
194#define USB_EXT_PORT_STAT_TX_SPEED_ID 0x000000f0
195#define USB_EXT_PORT_STAT_RX_LANES 0x00000f00
196#define USB_EXT_PORT_STAT_TX_LANES 0x0000f000
197
198#define USB_EXT_PORT_RX_LANES(p) \
199 (((p) & USB_EXT_PORT_STAT_RX_LANES) >> 8)
200#define USB_EXT_PORT_TX_LANES(p) \
201 (((p) & USB_EXT_PORT_STAT_TX_LANES) >> 12)
202
203/*
204 * wHubCharacteristics (masks)
205 * See USB 2.0 spec Table 11-13, offset 3
206 */
207#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */
208#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */
209#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
210#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
211
212#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */
213
214#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */
215#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
216#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
217#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
218
219#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
220#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */
221
222struct usb_hub_status {
223 __le16 wHubStatus;
224 __le16 wHubChange;
225} __attribute__ ((packed));
226
227/*
228 * Hub Status & Hub Change bit masks
229 * See USB 2.0 spec Table 11-19 and Table 11-20
230 * Bits 0 and 1 for wHubStatus and wHubChange
231 * Bits 2 to 15 are reserved for both
232 */
233#define HUB_STATUS_LOCAL_POWER 0x0001
234#define HUB_STATUS_OVERCURRENT 0x0002
235#define HUB_CHANGE_LOCAL_POWER 0x0001
236#define HUB_CHANGE_OVERCURRENT 0x0002
237
238
239/*
240 * Hub descriptor
241 * See USB 2.0 spec Table 11-13
242 */
243
244#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
245#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
246#define USB_DT_HUB_NONVAR_SIZE 7
247#define USB_DT_SS_HUB_SIZE 12
248
249/*
250 * Hub Device descriptor
251 * USB Hub class device protocols
252 */
253
254#define USB_HUB_PR_FS 0 /* Full speed hub */
255#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
256#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
257#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
258#define USB_HUB_PR_SS 3 /* Super speed hub */
259
260struct usb_hub_descriptor {
261 __u8 bDescLength;
262 __u8 bDescriptorType;
263 __u8 bNbrPorts;
264 __le16 wHubCharacteristics;
265 __u8 bPwrOn2PwrGood;
266 __u8 bHubContrCurrent;
267
268 /* 2.0 and 3.0 hubs differ here */
269 union {
270 struct {
271 /* add 1 bit for hub status change; round to bytes */
272 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
273 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
274 } __attribute__ ((packed)) hs;
275
276 struct {
277 __u8 bHubHdrDecLat;
278 __le16 wHubDelay;
279 __le16 DeviceRemovable;
280 } __attribute__ ((packed)) ss;
281 } u;
282} __attribute__ ((packed));
283
284/* port indicator status selectors, tables 11-7 and 11-25 */
285#define HUB_LED_AUTO 0
286#define HUB_LED_AMBER 1
287#define HUB_LED_GREEN 2
288#define HUB_LED_OFF 3
289
290enum hub_led_mode {
291 INDICATOR_AUTO = 0,
292 INDICATOR_CYCLE,
293 /* software blinks for attention: software, hardware, reserved */
294 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
295 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
296 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
297} __attribute__ ((packed));
298
299/* Transaction Translator Think Times, in bits */
300#define HUB_TTTT_8_BITS 0x00
301#define HUB_TTTT_16_BITS 0x20
302#define HUB_TTTT_24_BITS 0x40
303#define HUB_TTTT_32_BITS 0x60
304
305#endif /* __LINUX_CH11_H */