1/* $NetBSD: envsys.h,v 1.39 2022/11/21 21:24:01 brad Exp $ */
2
3/*-
4 * Copyright (c) 1999, 2007, 2014 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Tim Rightnour, Juan Romero Pardines and Bill Squier.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32#ifndef _SYS_ENVSYS_H_
33#define _SYS_ENVSYS_H_
34
35#ifndef _KERNEL
36#include <stdbool.h>
37#endif
38
39#include <sys/ioccom.h>
40#include <sys/power.h>
41#include <sys/queue.h>
42
43/*
44 * ENVironmental SYStem version 2 (aka ENVSYS 2)
45 */
46
47#define ENVSYS_MAXSENSORS 512
48#define ENVSYS_DESCLEN 32
49
50/* sensor units */
51enum envsys_units {
52 ENVSYS_STEMP = 0, /* Temperature (microkelvins) */
53 ENVSYS_SFANRPM, /* Fan RPM */
54 ENVSYS_SVOLTS_AC, /* AC Volts */
55 ENVSYS_SVOLTS_DC, /* DC Volts */
56 ENVSYS_SOHMS, /* Ohms */
57 ENVSYS_SWATTS, /* Watts */
58 ENVSYS_SAMPS, /* Ampere */
59 ENVSYS_SWATTHOUR, /* Watt hour */
60 ENVSYS_SAMPHOUR, /* Ampere hour */
61 ENVSYS_INDICATOR, /* Indicator */
62 ENVSYS_INTEGER, /* Integer */
63 ENVSYS_DRIVE, /* Drive */
64 ENVSYS_BATTERY_CAPACITY, /* Battery capacity */
65 ENVSYS_BATTERY_CHARGE, /* Battery charging/discharging */
66 ENVSYS_SRELHUMIDITY, /* relative humidity */
67 ENVSYS_LUX, /* illuminance in lux */
68 ENVSYS_PRESSURE, /* pressure in hPa */
69 ENVSYS_NSENSORS
70};
71
72/* sensor states */
73enum envsys_states {
74 ENVSYS_SVALID = 10, /* sensor state is valid */
75 ENVSYS_SINVALID, /* sensor state is invalid */
76 ENVSYS_SCRITICAL, /* sensor state is critical */
77 ENVSYS_SCRITUNDER, /* sensor state is critical under */
78 ENVSYS_SCRITOVER, /* sensor state is critical over */
79 ENVSYS_SWARNUNDER, /* sensor state is warn under */
80 ENVSYS_SWARNOVER /* sensor state is warn over */
81};
82
83/* sensor drive states */
84enum envsys_drive_states {
85 ENVSYS_DRIVE_EMPTY = 1, /* drive is empty */
86 ENVSYS_DRIVE_READY, /* drive is ready */
87 ENVSYS_DRIVE_POWERUP, /* drive is powered up */
88 ENVSYS_DRIVE_ONLINE, /* drive is online */
89 ENVSYS_DRIVE_IDLE, /* drive is idle */
90 ENVSYS_DRIVE_ACTIVE, /* drive is active */
91 ENVSYS_DRIVE_REBUILD, /* drive is rebuilding */
92 ENVSYS_DRIVE_POWERDOWN, /* drive is powered down */
93 ENVSYS_DRIVE_FAIL, /* drive failed */
94 ENVSYS_DRIVE_PFAIL, /* drive is degraded */
95 ENVSYS_DRIVE_MIGRATING, /* drive is migrating */
96 ENVSYS_DRIVE_OFFLINE, /* drive is offline */
97 ENVSYS_DRIVE_BUILD, /* drive is building */
98 ENVSYS_DRIVE_CHECK /* drive is checking its state */
99};
100
101/* sensor battery capacity states */
102enum envsys_battery_capacity_states {
103 ENVSYS_BATTERY_CAPACITY_NORMAL = 1, /* normal cap in battery */
104 ENVSYS_BATTERY_CAPACITY_WARNING, /* warning cap in battery */
105 ENVSYS_BATTERY_CAPACITY_CRITICAL, /* critical cap in battery */
106 ENVSYS_BATTERY_CAPACITY_HIGH, /* high cap in battery */
107 ENVSYS_BATTERY_CAPACITY_MAX, /* maximum cap in battery */
108 ENVSYS_BATTERY_CAPACITY_LOW /* low cap in battery */
109};
110
111/* sensor indicator states */
112enum envsys_indicator_states {
113 ENVSYS_INDICATOR_FALSE = 0,
114 ENVSYS_INDICATOR_TRUE = 1
115};
116
117/*
118 * IOCTLs
119 */
120#define ENVSYS_GETDICTIONARY _IOWR('E', 0, struct plistref)
121#define ENVSYS_SETDICTIONARY _IOWR('E', 1, struct plistref)
122#define ENVSYS_REMOVEPROPS _IOWR('E', 2, struct plistref)
123
124/*
125 * Compatibility with old interface. Only ENVSYS_GTREDATA
126 * and ENVSYS_GTREINFO ioctls are supported.
127 */
128
129/* get sensor data */
130
131struct envsys_tre_data {
132 unsigned int sensor;
133 union { /* all data is given */
134 uint32_t data_us; /* in microKelvins, */
135 int32_t data_s; /* rpms, volts, amps, */
136 } cur, min, max, avg; /* ohms, watts, etc */
137 /* see units below */
138
139 uint32_t warnflags; /* warning flags */
140 uint32_t validflags; /* sensor valid flags */
141 unsigned int units; /* type of sensor */
142};
143typedef struct envsys_tre_data envsys_tre_data_t;
144
145/* flags for warnflags */
146#define ENVSYS_WARN_OK 0x00000000 /* All is well */
147#define ENVSYS_WARN_UNDER 0x00000001 /* an under condition */
148#define ENVSYS_WARN_CRITUNDER 0x00000002 /* a critical under condition */
149#define ENVSYS_WARN_OVER 0x00000004 /* an over condition */
150#define ENVSYS_WARN_CRITOVER 0x00000008 /* a critical over condition */
151
152/* drive status */
153#define ENVSYS_DRIVE_EMPTY 1
154#define ENVSYS_DRIVE_READY 2
155#define ENVSYS_DRIVE_POWERUP 3
156#define ENVSYS_DRIVE_ONLINE 4
157#define ENVSYS_DRIVE_IDLE 5
158#define ENVSYS_DRIVE_ACTIVE 6
159#define ENVSYS_DRIVE_REBUILD 7
160#define ENVSYS_DRIVE_POWERDOWN 8
161#define ENVSYS_DRIVE_FAIL 9
162#define ENVSYS_DRIVE_PFAIL 10
163
164#ifdef ENVSYSUNITNAMES
165static const char * const envsysunitnames[] = {
166 "degC", "RPM", "VAC", "V", "Ohms", "W",
167 "A", "Wh", "Ah", "bool", "integer", "drive", "%rH", "lux", "Unk"
168};
169static const char * const envsysdrivestatus[] = {
170 "unknown", "empty", "ready", "powering up", "online", "idle", "active",
171 "rebuilding", "powering down", "failed", "degraded"
172};
173#endif
174
175
176/* flags for validflags */
177#define ENVSYS_FVALID 0x00000001 /* sensor is valid */
178#define ENVSYS_FCURVALID 0x00000002 /* cur for this sens is valid */
179#define ENVSYS_FMINVALID 0x00000004 /* min for this sens is valid */
180#define ENVSYS_FMAXVALID 0x00000008 /* max for this sens is valid */
181#define ENVSYS_FAVGVALID 0x00000010 /* avg for this sens is valid */
182#define ENVSYS_FFRACVALID 0x00000020 /* display fraction of max */
183
184#define ENVSYS_GTREDATA _IOWR('E', 2, envsys_tre_data_t)
185
186/* set and check sensor info */
187
188struct envsys_basic_info {
189 unsigned int sensor; /* sensor number */
190 unsigned int units; /* type of sensor */
191 char desc[33]; /* sensor description */
192 unsigned int rfact; /* for volts, (int)(factor x 10^4) */
193 unsigned int rpms; /* for fans, set nominal RPMs */
194 uint32_t validflags; /* sensor valid flags */
195};
196typedef struct envsys_basic_info envsys_basic_info_t;
197
198#define ENVSYS_GTREINFO _IOWR('E', 4, envsys_basic_info_t)
199
200#endif /* _SYS_ENVSYS_H_ */